Click image to view full size image
ABLB45 full automatic extrusion blow molding machine wasspecially designed for making plastic water bottles,medicalbottles,oil bottles,plastic balls ,suction tubes and other smallplastic containers not over 2L.
Main parts of Machine | Picture | Explanation |
Mould Open and Close machanism |
|
Single station Open and close the mould |
Oil Pump |
| Oil pump From TaiWan JinShun use to drive the machine |
Computer control system (PLC) |
| Japanese Mitisubishi PLC
Used to control all electrial components and touch screen |
Screw and fan |
Screw diemeter 45mm Fan used to cool the screw. | |
Die head |
|
Double die heads available More fast and reliable output |
Electric Cabinet |
| This part is the full electric components of the machine |
The main components of the machine. ( ABLB45 )
electronicparts |
|
Name | Trader |
Micro computer control system | Japanese MITSUBISHI |
Temperature Controller | TAIWAN YANHUA PID |
Auxiliary Relay | OMRON |
contactor | Schneider from France |
Electric motor | Three phase 220V or 380V |
Power Source | TAIWAN MEANWELL |
Transducer | TAIDA FROM CHINA |
hydraulic parts |
|
Name | Trader |
Oil pump | TAIWAN HIGH-TECH |
Valve | JAPAN YUKEN |
Oil pump and connection | JAPAN YUKEN |
Sealed part | HALLITE |
air control system |
|
Name | Trader |
Cylinder | AIRTAC |
Air Valve | FESTO |
Technical Parameters: ( ABLB45 )
Max. Product volume | 2L |
Out put capacity | 500~600pcs/h |
Screw diameter | 45mm |
Screw L/D ratio | 24:1 L/D |
Screw drive power | 10 KW |
Screw heating capacity | 2.6 KW |
No.of heating zone | 3 zones |
Output of HDPE | 35 KG/H |
Oil pump drive power | 4.8 KW |
Clamping force | 32KN |
Max.size of mold | 80-350mm |
Mold stroke | 250 X 320mm |
Max.die diameter | 80mm |
Blowing pressure | 0.6 mpa |
Air Volume | 0.4M³/MIN |
Cooling water pressure | 0.3mpa |
Water consumption | 30 L/MIN |
Size of Machine | 2.6x1.4x2.2m |
Weight of machine | 2.8 ton |
Full-automatic extrusion blow moulding machine
Full-automatic extrusion blow moulding machine
